← Crane Diagnostic

Circuit Walkthrough

Upload your actual crane schematic. Tell us about the circuit. HydroMind AI will explain how your specific circuit works — pressure path, normal values, and failure modes — so you can troubleshoot with confidence.

1Upload Schematic

2Circuit Details

3AI Walkthrough

📄

Drag your schematic here

PNG or JPG image of your crane schematic

💡 Tip: Upload a PNG or JPG of your schematic page. Your image is sent securely to the AI for analysis — it's never stored or shared.

Equipment Type *

OEM & Model

Pump System (leave blank if unsure — AI will identify it from the schematic)

Pilot Circuit Configuration (leave blank if unsure — AI will identify it from the schematic)

Known Issue or Symptom (Optional) Adding a symptom focuses the failure mode analysis on your specific problem

Additional Notes (Optional)

Analysing your circuit...

Reading schematic and searching HydroMind Knowledge Base

⚠ Safety Reminder: Before taking any pressure readings or working on this circuit — isolate the load, depressurise the system, discharge accumulators, and follow full LOTO procedures. Never work under a suspended load.

🔧

Ready to diagnose a fault?

Now that you understand how the circuit works, use the Crane Diagnostic Tool to troubleshoot specific faults with AI-guided step-by-step analysis.