Crane Diagnostic Agent

🏗️
Crane Diagnostic Agent
Equipment status is on the left. Pick a crane, watch the live parameters and diagnostic sequence, and run your fault analysis here.
01
Select Your Crane
Pick the crane make and model from the Equipment panel on the left. Status indicators show current operational state.
02
Describe the Symptom
Type the fault symptom in the input box — e.g. "high case drain pressure on main hoist pump at full load".
03
Review Live Parameters
Check system pressure, case drain, oil temperature, and flow rate in the left panel before and during diagnosis.
04
Follow the Diagnostic Sequence
The agent walks through a 10-step ladder — Safety Isolation → HPU Pressure → Pump Flow → Relief Valve → … → Final Check.
05
Use Quick-Start Prompts
Click any fault card below or the quick-hint chips to start a focused diagnostic session instantly.
06
Export Diagnostic Report
At session end, click Export Diagnostic Report to download a DPR-style summary for your maintenance records.
AI guidance is for reference only. All findings must be verified against OEM documentation and reviewed by a qualified engineer before implementation. See Disclaimer.
Quick: Full Sequence Relief Valve HPU Fault Slew Circuit